Pompa a immersione (12V)

Pompa a immersione (12V)

Pompa a immersione (12V)

S.14637

Peso: 0.51kg
Connect a hose to the outlet nozzle and immerse the complete pump in liquid.
Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running).
The pump will deliver immediately.
For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank.
Avoid dry running for long periods.
For drinking water applications sterilise regularly.
Store away from excessive heat and direct sunlight to avoid external damage.
If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections.
Pumps fresh and sea water.
Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol).
Bilge pump-out in tight areas.
Water Transfer; Deck showers; Deck, Anchor & general Wash-down.
Robust, slim line with clip-on easily cleaned filter.
Visualizza Specifiche Prodotto
Visualizza Se Adatto Per Visualizza Codici Articolo OEM
Specifiche Prodotto

Specifiche

Connect a hose to the outlet nozzle and immerse the complete pump in liquid.
Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running).
The pump will deliver immediately.
For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank.
Avoid dry running for long periods.
For drinking water applications sterilise regularly.
Store away from excessive heat and direct sunlight to avoid external damage.
If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections.
Pumps fresh and sea water.
Rapid diesel refuelling and transfer with no spillage (NOT suitable for Petrol).
Bilge pump-out in tight areas.
Water Transfer; Deck showers; Deck, Anchor & general Wash-down.
Robust, slim line with clip-on easily cleaned filter.
rule
Amp
4.5
Corpo
POM
Corrente
12V (4.5Amps)
Fascia di Temperatura
Diesel to +104°F (+40°C), Water to +176°F (+80°C)
Flow Rate Litres Per Minute
18
Fornito con
supplied with the cables/clips, no hose.
Frequenza flusso galloni per minuto
4
Gli appunti
Connect a hose to the outlet nozzle and immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running). The pump will deliver immediately. For an in-line installation unclip the filter to expose the inlet nozzle, connect length of hose between the tank and nozzle. The pump must be fitted below the tank. Avoid dry running for long periods. For drinking water applications sterilise regularly. Store away from excessive heat and direct sunlight to avoid external damage. If the pump fails to perform, check for blockages (including filters), leaks and correct hose & electrical connections.
Lunghezza (mm)
165
Lunghezza (pollici)
6 1/2
Lunghezza del cavo (ft)
13
Lunghezza del cavo m:
4
Marca
rule
Metri altezza pompaggio
9.7
Non adatto per
Petrol and AdBlue
Outlet ins
1/2
Pressione (psi)
14psi
Pressure Bar
0.96 bar
Prodotti Alternativi
19361
Prodotti Correlati
10657
Qualità
Continuous Duty - Should not be run for long periods of time.
Tariff Code
8413810090
Tensione
12V
Tipo pompa
Centrifugal submersible and in-line pump
Ø (mm)
38
Ø (pollici)
1 1/2
Ø Interno tubo idraulico (mm)
13
Ø Interno tubo idraulico (pollici)
1/2
Adatto A Marca/Modello

Adatto A Marca/Modello

Per visualizzare questa informazione, effettuate l’accesso con il vostro codice cliente
Codici Articolo OEM

Codici Articolo OEM

Per visualizzare questa informazione, effettuate l’accesso con il vostro codice cliente
Pagine Catalogo

Pagine Catalogo

Catalogo
Pagina